It can offer a longer use life if you choose the TCT planer blade. ( Note: TCT materials is much better than HSS materials, sharper and not easy to rust.)
| Product Name |
Carbide Planer Blade |
| Brand Name | Leabon |
| Model | Makita/Hitachi/Most 82mm models worldwide |
| Dimension | 82×5.5×1.2mm |
| Color | Silver Tone |
| Material | TCT/HSS |
| Package | 10pcs in each package |
82*5.5*1.2mm
TCT/HSS
TCT: High hardness;Good wear resistance.
The cutting speed of cemented carbide is 4 ~ 7 times higher than that of high speed steel, and its service life is 5 ~ 80 times higher.
HSS: High hardness can be maintained under high heat from high speed cutting (approx. 500℃).
10pcs in one package.
Using Germany hard annoy. Hardness reaches HRC90, notch is <0.1mm. New processing craftsmanship make product performance far exceed similar products. It’s good for cutting hardest wood.
Tungsten content is 18%. Hardness is HRC63-64 and notch is <0.4mm. It’s good for cutting medium and soft wood such as fir wood, plywood and etc.
1.Don’t use on cement, stones or metal .
2.Slow feeding speed should be better than faster.
3.Prevent the sawdust in wood from popping and hurting people.
4.Keep the blade straight by sharpening it often.
5.When put the cutter on machine, keep three blades in one circle.
6.All the screws which are used to press the should be fixed cutter should be fixed.
7.Use low planing speed , increase feeding rate and cutting edge depth.
8.Use reasonable cutter materials.
9.With good cutting angle, front angle, auxiliary back angle, cutter will be wear faster when the cutting edge angle is bigger.
10.Repair cutter point.
| Weight | N/A |
|---|---|
| Dimensions | N/A |
| Model Number | ZTDP001 |
| Brand Name | Leabon |
| Sales Unit | |
| Material | TCT, HSS |
You must be logged in to post a review.
Jointing & Planing
Jointing & Planing
Jointing & Planing
2 Teeth Woodworking Machinery Finger Joint Top Cutter For Spindle Shaper
Jointing & Planing
Jointing & Planing
Reviews
There are no reviews yet.